Braeburn 7305 Thermostat for Conventional Heating Systems and Heat Pumps
Braeburn® trademark is property of its respective owner.
How to Set and Connect to WiFi
1.Download the BlueLink Smart Connect® app from Google Play Store or Apple® App Store
2. Open the BlueLink Smart Connect App. Select REGISTER and enter your e-mail address.
3.Enter the thermostat serial number. You can locate this number on the back of the thermostator on the enclosed thermostat registration card.
NOTE:If you removed the thermostat to locate the serial number, make sure to reconnect it before selecting ENTER
4.Complete the registration steps. Once you reach the Create Account screen, select REGISTER
5.Enter your network name (SSID) and password, select ENTER ( inputs are case sensitive)
6.The application will now instruct you to put the thermostat into Wi-Fi connect mode.
7.On the thermostat, press and hold the HOLD and RETURN buttons for 3 seconds.The display will alternate the words WIFI and SCAN and the symbol will flash.
8.Return to the application and select OK. The word WAIT will appear in the thermostat display
9.The application will prompt you to go to your smartphone, tablet or computer Wi-Fi settings and select the bluelink_wifi network.
NOTE:Do not exit the application. Minimize it so that you can return to the same screen after selecting the bluelink_wifi network. This is usually done by pressing the home button on yoursmart phone or tablet.
10.After selecting the bluelink_wifi network, use the home key to return to the applicationand select OK.
11.Once a connection is made, Connection Successful will appear in the application screen. At thermostat, your network name followed by the MAC address will appear.
12.At thermostat, press RETURN to exit Wi-Fi setup mode.
NOTE:After setup is complete, make sure to return your phone or tablet to the original wireless network.
